BMW Motorrad K 1300 GT Exclusive Edition Page 66 Rider'S Manual Download

Page: 66 / 176

The hazard warning flashers
continue to operate.
Left and right turn indicator
telltale lights are off.

Switch off the hazard
warning flashers

Press button

for the hazard

warning flashers.
Hazard warning flashers
switched off.

Emergency off switch
(kill switch)

Emergency off switch (kill
switch)

Operating the kill switch
when riding can cause

the rear wheel to lock and thus
cause a fall.
Do not operate the kill switch
when riding.
The emergency off switch is a
kill switch for switching off the
engine quickly and easily.

Engine switched off

Normal operating position
(run)

Grip heating

with heated handlebar grips

Operating grip heating

Start the engine.

Grip heating can be activ-
ated only when the en-

gine is running. If the engine is
switched off, grip heating must
be reactivated once the engine is
switched on again.

Operation

Summary of Contents for Motorrad K 1300 GT Exclusive Edition

















































































































































































Search results

Summary of Contents for Motorrad K 1300 GT Exclusive Edition

Reviews:

Related manuals for Motorrad K 1300 GT Exclusive Edition

Brands by name

Popular brands

BMW Motorrad K 1300 GT Exclusive Edition, Rider'S Manual

Search results

Summary of Contents for Motorrad K 1300 GT Exclusive Edition

Reviews:

Related manuals for Motorrad K 1300 GT Exclusive Edition

Brands by name

Popular brands