BMW MOTORRAD AUDIO SYSTEM, Rider'S Manual

Page: 48 / 70

Move multi-controller 1 in dir-
ection b and hold it in this po-
sition until
SEARCH
appears
on the display.
The audio system searches
for a visible communication
system, the Bluetooth sym-
bol flashes. There is no music
playback while the search is in
progress. One of the following
will appear:
OK
: Connection established,
playback via speakers in hel-
met.
FAILED
: Connection failed,
no communication system
found.
UNABLE
: Connection not
possible, for example because
a helmet with Bluetooth stand-
ard 1.2 was saved beforehand,
or because a connection with
helmet 2 was attempted before
the system had connected to
helmet 1.
If no connection could be estab-
lished:
If there are active Bluetooth
devices in the vicinity, switch
them off.
Delete the devices saved in the
audio system (
RESET
).
Delete the devices saved in the
communication system.
Run the pairing procedure
again.
Additional functions
Rider's helmet with BMW
Motorrad communication
system with Bluetooth
standard 2.0
The volume of the helmet
speakers can be adjusted dir-
ectly using multi-controller
1 .
Any change in helmet volume
is shown on the display.
The volume for helmet 2
(
HELMET 2
) cannot be adjusted
by means of the multi-controller.
6
44
z Bluetooth