BMW K 1600GT, Rider'S Manual

Page: 150 / 209

minutes before repeating the
attempt in order to protect the
starter motor and the donor
battery.
Allow both engines to idle for a
few minutes before disconnect-
ing the jump leads.
Disconnect the jump lead from
the negative terminals first,
then disconnect the second
lead from the positive termin-
als.
Installing seat (
127).
Lighting
Replacing bulb for high-
beam headlight
NOTICE
The description below steps you
through the procedure for repla-
cing the left bulb. The procedure
for working on the right side is
the same.
Turn slipstream deflector 1 out.
Remove screw 2 and work
side cover 3 to the rear and
remove.
Remove screw 1 .
Switch on the ignition and raise
the windscreen to its highest
position.
Remove screw
2 and work
hand protector 3 to the side
to remove.
Switch off the ignition and
wait until the windscreen has
moved to its lowest position.
Remove screws 1 .
Work speaker unit 2 to the rear
to remove.
8
148
z Maintenance