NOTICE
See also the other functions of
the remote control for the central
locking system.
Activation takes 30 seconds to
complete.
Turn indicators flash twice.
Confirmation tone sounds
twice (if programmed).
Anti-theft alarm is active.
To deactivate the motion
sensor (for example if you
are about to transport the
motorcycle on a train and the
swaying movement of the
moving train could trip the
alarm), press button
1
on the
remote control or the radio-
operated key again during the
activation phase.
Turn indicators flash three
times.
Confirmation tone sounds three
times (if programmed).
Motion sensor is deactivated.
Alarm
An alarm can be triggered by
the motion sensor
an attempt to use an unau-
thorised key to switch on the
ignition
disconnection of the anti-theft
alarm from the motorcycle's
battery (internal battery in the
anti-theft alarm provides power
- acoustic alarm only, the turn
indicators do not flash).
All functions are sustained even if
the internal battery of the anti-
theft alarm system is flat; the
only difference is that an alarm
cannot be triggered if the system
is disconnected from the motor-
cycle's battery.
An alarm lasts for approximately
26 seconds. While an alarm is in
progress an alarm tone sounds
and the turn indicators flash. You
can select the type of alarm tone
in the multifunction display.
4
87
z
Operation
Summary of Contents for K 1600GT
