BMW K 1600 GTL Exclusive, Rider'S Manual

Page: 127 / 187

Hold the license-plate carrier in
position.
Install screws
1 on left and
right.
Front wheel stand
Mounting front wheel
stand
ATTENTION
Use of the BMW Motorrad
front wheel stand without an
additional center or auxiliary
stand.
Component damage caused by
tipping over.
Place the motorcycle on the
center stand or an auxiliary
stand before lifting it with the
BMW Motorrad front wheel
stand.
Use basic stand with part
number (83 30 0 402 241) in
combination with front-wheel
adapter (83 30 0 402 243).
Make sure ground is level and
firm and place motorcycle on
its center stand.
Loosen locating screws 1 .
Push two mounting pins 2
far enough apart that front
suspension fits between them.
Use locating pins
3 to set front
wheel stand to desired height.
Center front wheel stand rela-
tive to front wheel and push it
against front axle.
ATTENTION
The left mounting pin moves
too much.
Damage to the sensor ring
of the ABS integrated in the
BMW Motorrad.
8
125
z Maintenance