BMW K 1600 GTL Exclusive, Rider'S Manual

Page: 121 / 187

control units can be adapted for
the new wheel sizes.
TPC/RDC sticker
ATTENTION
Improper tire removal.
Damage to the TPC/RDC sen-
sors.
Inform a specialist service
facility or an authorized
BMW Motorrad retailer on the
fact that the wheel is equipped
with a TPC/RDC sensor.
On motorcycles equipped with
TPC/RDC, a corresponding
sticker is located on the wheel
rim at the position of the TPC/
RDC sensor. During a tire
change it must be ensured
that the TPC/RDC sensor
is not damaged. Inform the
BMW Motorrad retailer or the
authorized workshop of the TPC/
RDC sensor.
Removing front wheel
Make sure ground is level and
firm and place motorcycle on
its center stand.
Remove screws 1 on left and
right.
Pull out front wheel cover to-
ward front.
Unclip retaining clip 1 holding
the sensor cable to the brake
line.
Remove cable tie
2 .
Mask off area of wheel rim that
could be scratched in process
of removing brake calipers.
8
119
z Maintenance