BMW K 1200 GT - Rider'S Manual Download Page 89

Page: 89 / 160

Luggage
Correct loading

Overloading and

imbalanced loads

can adversely affect the

motorcycle's handling.

Do not exceed the permiss-

ible gross weight and be sure

to comply with the instruc-

tions on loading.
Fitting a luggage system will

affect the handling of your

motorcycle. The maximum

speed recommended for

riding with loaded cases is

180 km/h. If the large or small

topcase (OA) is fitted, the

maximum permissible speed

is 180 km/h.

Set spring preload, damping

characteristic and tyre pres-

sures to suit total weight.

Make sure that the weight

is uniformly distributed

between right and left.

Pack heavy items at the

bottom and toward the in-

board side.

Max. load in each case (left

and right): 10 kg.

Max. load in tank rucksack

5 kg.

Accessories

ProCarManuals.com

Summary of Contents for K 1200 GT -

































































































































































Search results

Summary of Contents for K 1200 GT -

Reviews:

Brands by name

Popular brands

BMW K 1200 GT -, Rider'S Manual

Search results

Summary of Contents for K 1200 GT -

Reviews:

Brands by name

Popular brands