BMW K 1200 GT -, Rider'S Manual

Page: 109 / 160

Turn the end silencer to its
initial position.
Install screw
4
for the
bracket of the end silencer
in the rear footrest, but do
not tighten it at this point.
Align clamp
3
on the end
silencer with mark
A
(arrow)
on oxygen sensor
B
.
Tighten clamp
3
on the end
silencer to the specified
tightening torque.
Silencer to manifold
35 Nm
Thread-locking compound:
Optimoly TA
If the gap between the
rear wheel and the end
silencer is too small, the rear
wheel can overheat.
The clearance between the
rear wheel and the end silen-
cer must be at least 15 mm.
Install screw
4
for the
bracket of the end silencer
in the rear footrest and
tighten the screw to the
specified torque.
Silencer to rear footrest,
right
16 Nm
7
107
z Maintenance
ProCarManuals.com