BMW K 1200 GT -, Rider'S Manual

Page: 55 / 160

Handlebars
Adjusting handlebars
Fully slacken screws
1
.
Sit on the motorcycle, pull
the handlebars toward you
and move them up or down
to the desired position.
Make sure that the handle-
bars are perfectly engaged
in the handlebar mounts.
Tighten screws
1
to the
specified tightening torque.
Fastener, handlebar ad-
juster to bottom handle-
bar yoke
20 Nm
Lights
Switching on the side
lights
The side lights switch on
automatically when the
ignition is switched on.
The side lights place a
strain on the battery. Do
not switch the ignition on for
longer than absolutely neces-
sary.
Switching on the low-
beam headlight
The low-beam headlight
switches on automatically
when you start the engine.
When the engine is not
running you can switch
on the high-beam headlight
by switching on the ignition
and either switching on the
high-beam headlight or oper-
ating the headlight flasher.
Switching on the high-
beam headlight
Press the top part of
switch
1
for the high-beam
headlight.
High-beam headlight
switched on.
Move switch
1
for the
high-beam headlight to the
centre position.
High-beam headlight
switched off.
Press the bottom part of
switch
1
for the high-beam
headlight.
4
53
z Operation
ProCarManuals.com