Check the brake-fluid level at
regular intervals.
Have the defect rectified
as quickly as possible by a
specialist workshop, prefer-
ably an authorised BMW
Motorrad dealer.
Clutch
Checking clutch
operation
Pull the clutch lever.
The pressure point must be
clearly perceptible.
If the pressure point is not
clearly perceptible:
Have the clutch checked
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Checking the clutch fluid
level
Make sure the ground is
level and firm and place the
motorcycle on its stand.
Move the handlebars to the
straight-ahead position.
Check the clutch fluid level
in reservoir
1
.
Wear of the clutch
causes the fluid level in
the clutch fluid reservoir to
rise.
The clutch system is
filled with a special hy-
draulic fluid that does not
have to be changed.
Clutch fluid level
Do not permit the clutch
fluid level to drop. (motor-
cycle upright and handle-
bars in straight-ahead po-
sition)
If the fluid level drops:
7
77
z
Maintenance
Summary of Contents for HP2 ENDURO
