BMW G 650 GS - BROCHURE 2010 Rider'S Manual Download Page 60

Page: 60 / 135

Adjusting case volume

Open case and empty com-
pletely.

Release four locking levers

from detent and fold up.
Slide outer case sleeve as far
as possible inward or outward,
depending on desired case vol-
ume.

The locking levers can only
be closed if the outer case

sleeve is positioned at one of the
two stops.

Close four locking levers

and

lock.

Closing case.

Removing case

Turn key

in case lock per-

pendicular to direction of travel.
Hold down yellow locking de-
vice

and fold out carrying

handle

Pull up red release lever

Locking flap

pops up.

Fold locking flap all the way
open.
Remove case from mount by
its handle.

Accessories

Summary of Contents for G 650 GS - BROCHURE 2010








































































































































Search results

Summary of Contents for G 650 GS - BROCHURE 2010

Reviews:

Related manuals for G 650 GS - BROCHURE 2010

Brands by name

Popular brands

BMW G 650 GS - BROCHURE 2010, Rider'S Manual

Search results

Summary of Contents for G 650 GS - BROCHURE 2010

Reviews:

Related manuals for G 650 GS - BROCHURE 2010

Brands by name

Popular brands