BMW G 650 GS - BROCHURE 2010 Rider'S Manual Download Page 34

Page: 34 / 135

The hazard warning flash-
ers place a strain on the

battery. Do not use the hazard
warning flashers for longer than
absolutely necessary.

Press button

on left to

switch on hazard warning
flashers.
Switch off ignition.
Press button

on right to

switch off hazard warning flash-
ers.

Emergency ON/OFF
switch

Operating the emergency
ON/OFF switch when riding

can cause the rear wheel to lock
and thus cause a fall.
Do not operate the emergency
ON/OFF switch when riding.
The engine can be switched
off easily and quickly using the
emergency ON/OFF switch.

Operating position

Engine switched off.

The engine can only be
started in the operating

position.

Operation

Summary of Contents for G 650 GS - BROCHURE 2010








































































































































Search results

Summary of Contents for G 650 GS - BROCHURE 2010

Reviews:

Related manuals for G 650 GS - BROCHURE 2010

Brands by name

Popular brands

BMW G 650 GS - BROCHURE 2010, Rider'S Manual

Search results

Summary of Contents for G 650 GS - BROCHURE 2010

Reviews:

Related manuals for G 650 GS - BROCHURE 2010

Brands by name

Popular brands