BMW F 800 GT 2015, Rider'S Manual

Page: 105 / 171

with center stand OE
Make sure ground is level and
firm and place motorcycle on
center stand.
Use basic stand with front
wheel mount. The basic stand
and its accessories are avail-
able through your authorized
BMW Motorrad retailer.
Loosen mounting screw 1 .
Push the two mounts 2 far
enough apart that the tele-
scopic fork fits between them.
Use locating pins
3 to set front
wheel stand to desired height.
Center front wheel stand rela-
tive to front wheel and push it
against front axle.
Align the two mounts 2 so that
the telescopic fork rests se-
curely on them.
Tighten mounting screw
1 .
Apply uniform pressure to push
front wheel stand down and
raise motorcycle.
with center stand OE
ATTENTION
Lifting-off of the main stand
if the vehicle is raised too
high.
Component damage cause by
tipping over.
When raising the motorcy-
cle, make sure that the center
stand remains on the ground.
8
103
z Maintenance
ProCarManuals.com