BMW F 800 GT 2015, Rider'S Manual

Page: 101 / 171

with center stand OE
Make sure ground is level and
firm and place motorcycle on
center stand.
Raise front of motorcycle until
the front wheel can turn freely.
BMW Motorrad recommends
the BMW Motorrad front wheel
stand for lifting the motorcycle.
Mount front wheel stand
(
102).
Loosen axle clamping
screws
1 .
Remove quick-release axle 2
while supporting wheel.
Roll front wheel forward to re-
move.
Remove spacing bushing 1 on
left side from wheel hub.
Installing front wheel
WARNING
Use of a wheel which does
not comply with series speci-
fications.
Malfunctions during control inter-
ventions by ABS.
Please see the information on
the effect of wheel sizes on the
ABS system at the beginning
of this chapter.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque.
Damage or loosening of screwed
connections.
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
8
99
z Maintenance
ProCarManuals.com