EN/16
Retrofit / Installation kit No. 82 83 0 140 507
Issue date: 06.2001
Installation Instructions No. 01 29 0 140 511
11.
To install the front door speakers
0
0
0
As you install the speakers it is essential that
you ensure that the screws tap new threads
since otherwise they will not hold the
speakers securely.
Ensure that the sealing ring is not in contact
with the speaker diaphragm.
If the car has a telephone system the
short
branch in the speaker casing is to be used to
connect the new door speaker.
Insulate the other branch and place it in the
speaker casing behind the insulation (white).
Connect the front tweeter (9), insert it into the
existing speaker casing (30) and secure it with
Philips screws.
Then affix the foam ring (11) to the edge of the
speaker.
0
Do not connect the standard tweeter.
Ensure that the free connection cable is
not bent.
Secure the existing speaker cable to the
door trim with cable ties so that the cable
cannot hang down loose after the door trim
has been installed.
As you connect the new tweeter ensure that
no stripped cable end projects out of the
nsulation-piercing connector.
Connect branch (30), green and green/black cable
to connect the tweeter to the existing speaker
cable (31) using the supplied insulation-piercing
connectors (14) as follows:
Cable colour/
Tweeter Door Wiring harness colour
green/black
left
yellow/brown
green
left
yellow/red
green/black
right
blue/brown
green
right
blue/red
9
30
11
039 117 B
30
14
31
039 0118 B
