BMW C650 Sport, Rider'S Manual

Page: 90 / 174

General instructions
The "Maintenance" chapter de-
scribes straightforward proced-
ures for checking and replacing
certain wear parts.
Special tightening torques are lis-
ted as applicable. The tightening
torques for the threaded fasten-
ers on your vehicle are listed in
the section entitled "Technical
data".
You will find information on more
extensive maintenance and repair
jobs in the repair instructions on
DVD for your vehicle, which is
available from your authorised
BMW Motorrad dealer.
Some of the work calls for spe-
cial tools and a thorough know-
ledge of the technology involved.
If you are in doubt, consult a
specialist workshop, preferably
your authorised BMW Motorrad
dealer.
Standard tool kit
1 Hook wrench
Adjusting spring preload
for rear wheel (
67).
2 Torx wrench, T30
Checking engine oil level
(
88).
Topping up coolant
(
96).
3 Spare fuses with puller tool
Minifuses, 4 A, 7.5 A, 10 A
and 15 A
Replace the fuses.
4 Open-ended spanner
Width across flats 8/10
4 Removing battery
(
115).
5 Reversible screwdriver
blade
Phillips PH1 and Torx T25
Removing body panels.
Bulb for rear turn indic-
ator, replacing (
110).
Removing battery
(
115).
Engine oil
Checking engine oil level
ATTENTION
Incorrect oil-level reading
after lengthy life due to oil
collecting in the oil sump in-
stead of the oil tank
Misinterpretation of the oil level
Check the oil level only
after a lengthy ride or when
the engine is at operating
temperature.
8
88
z Maintenance