BMW C650 Sport, Rider'S Manual

Page: 59 / 174

Even with ASC switched off,
engine speed is governed to
prevent extreme acceleration
of the rear wheel while clear of
the ground. This is in order to
protect the drivetrain.
ASC Switching on
The Maxi­Scooter is at a stand-
still.
Switch on the ignition.
The on-board computer read-
ings appear on the display.
SETUP selecting (
53).
SETUP 3 has been started. Di-
viding line 4 has disappeared.
SETUP ASC
appears on the
display.
Short-press INFO 2 to toggle
between
ASC ON
and
ASC OFF
5 .
SETUP ASC ON
appears on
the display.
ASC warning light remains
off or flashes until self-dia-
gnosis has completed.
Anti-theft alarm (ASC) is
switched on.
Long-press TRIP
1 to exit
SETUP
.
The on-board computer read-
ings appear on the display.
Alternatively, switch the ignition
off and then on.
If you switch the ignition off
then on again and the ASC
light comes back on, there is a
fault in the ASC.
Calibrating ASC
Reduced reserves of stability
of ASC control following a tyre
change.
NOTICE
Calibration is the process of ad-
apting control to the effective
tyre radii of the front and rear
wheels.
Effective tyre radius depends
on tyre make, tread depth, tyre
press and the load carried on the
vehicle.
Always re-calibrate the ASC after
changing a tyre or tyres to adapt
4
57
z Operation