BMW C650 Sport, Rider'S Manual

Page: 60 / 174

the system to the changed tyre
radii.
As tyre wear progresses, regu-
larly re-calibrate the ASC so that
it can operate as effectively as
possible.
ASC Switching on ( 57).
SETUP ASC ON
appears on
the display.
Long-press INFO 2 to start
calibration.
CAL.
3 flashes.
ASC warning light starts to
show.
There are no functions as-
signed to TRIP
1 or INFO 2 .
The only way to exit this menu
item is to switch the ignition of
and then on again.
Calibration is stated and ex-
pects the Maxi­Scooter to be
ridden forward.
ATTENTION
ASC is not available until
calibration completes.
Risk of falling
Use a smooth and level stretch
of straight road with good grip
for the calibration procedure.
Ride in a straight line and re-
main for 6 seconds in the fol-
lowing speed range, riding at
as steady a speed as possible.
Speed range for ASC
calibration
The Maxi­Scooter has to be
ridden in a straight line within
a certain speed range:
30...50 km/h
ASC is calibrated.
ASC warning light goes out.
The on-board computer read-
ings appear on the display.
ASC calibration has completed.
You can resume your journey.
Anti-theft alarm
with alarm system (DWA)
OE
DWA Activating
Switching on ignition ( 44).
DWA adjusting ( 59).
Switch off the ignition.
If the alarm system (DWA) is
activated, the DWA will be
4
58
z Operation