BMW C 400 X Rider'S Manual Download Page 81

Page: 81 / 245

without Keyless Ride

The seat can also be unlocked
without switching on the igni-
tion. To do so, insert the igni-
tion key

into the lock

the right-hand side trim panel
and turn clockwise.
The seat is unlocked.

with Keyless Ride

The seat can also be unlocked
without switching on the igni-
tion. To do so, insert the key
remote

, which is folded open,

into the lock

on the right-

hand side trim panel and turn
clockwise.
The seat is unlocked.

Raise the seat

at the rear

and fold it open.

To close, press the seat

into

the locking mechanism at the
rear.

Operation

https://www.motorcycle-manual.com/

Summary of Contents for C 400 X






















































































































































































































































Search results

Summary of Contents for C 400 X

Reviews:

Related manuals for C 400 X

Brands by name

Popular brands

BMW C 400 X, Rider'S Manual

Search results

Summary of Contents for C 400 X

Reviews:

Related manuals for C 400 X

Brands by name

Popular brands