BMW C 400 X Rider'S Manual Download Page 127

Page: 127 / 245

Do not sit on the motorcycle
when it is parked on the side
stands.
If the slope of the road permits,
turn the handlebars to the left.

Center stand

Switch off engine.

ATTENTION

Poor ground conditions in
area of stand

Component damage cause by
tipping over

Always check that the ground
under the stand is level and
firm.

ATTENTION

Center stand folds if subject
to sharp movements.

Component damage cause by
tipping over

Do not sit on the motorcycle
while it is resting on the center
stand.
Fold out the center stand and
prop up the Scooter.

Refueling

without Keyless Ride

WARNING

Fuel is highly flammable

Fire and explosion hazard

Do not smoke. Never bring
a naked flame near the fuel
tank.

ATTENTION

Contact of fuel and plastic
surfaces

Damage to surfaces (become
unattractive or cloudy)

Immediately clean plastic sur-
faces after contact with fuel.

Place the Scooter on its center
stand, ensuring that the ground
is level and firm.

Open the protective cap

Unlock and open the gas cap
in a clockwise direction using
the ignition key

125

Riding

https://www.motorcycle-manual.com/

Summary of Contents for C 400 X






















































































































































































































































Search results

Summary of Contents for C 400 X

Reviews:

Related manuals for C 400 X

Brands by name

Popular brands

BMW C 400 X, Rider'S Manual

Search results

Summary of Contents for C 400 X

Reviews:

Related manuals for C 400 X

Brands by name

Popular brands