BMW C 400 X Rider'S Manual Download Page 185

Page: 185 / 245

Bluetooth connection is disrupted.

Possible cause

Remedy

Bluetooth connection to the mobile end device is
interrupted.

Switch off energy saving mode.

Bluetooth connection to the helmet is interrupted.

Switch off the communication system of the hel-
met and connect again after one to two minutes.

Volume in the helmet cannot be adjusted.

Switch off the communication system of the hel-
met and connect again after one to two minutes.

Phone book is not displayed in the TFT display.

Possible cause

Remedy

Phone book was has not yet been transferred to
the vehicle.

During Bluetooth pairing to the mobile terminal,
confirm the transfer of the telephone data
(

104).

Active route guidance is not displayed in the TFT display.

Possible cause

Remedy

Navigation from the BMW Motorrad Con-
nected App was not transferred.

Call up the BMW Motorrad Connected App on
the connected mobile end device before riding.

Route guidance cannot be started.

Ensure that there is a data connection to the mo-
bile end device and check the map data on the
mobile end device.

183

Technical data

https://www.motorcycle-manual.com/

Summary of Contents for C 400 X






















































































































































































































































Search results

Summary of Contents for C 400 X

Reviews:

Related manuals for C 400 X

Brands by name

Popular brands

BMW C 400 X, Rider'S Manual

Search results

Summary of Contents for C 400 X

Reviews:

Related manuals for C 400 X

Brands by name

Popular brands