6
C.
ULF Control Module Installation
1.
Remove/ peel off the Bluetooth
TM
Passkey sticker
(2) from the label on the ULF Control Module (1).
2.
Place the Bluetooth
TM
Passkey sticker removed
from the ULF Control Module onto the ULF
Passkey Reference Card, P/N 84 11 0 302 638.
3.
Place this card inside the owner’s manual
portfolio. Show this card to the customer when
demonstrating the system and the pairing
procedure to the customer. The code on the
sticker is needed to pair phones to the ULF
Control Module.
E39 Sedan - Produced as of:
- 9/02 with or without Navigation
- 3/02 through 8/02 with Navigation
1.
For vehicles produced prior to 9/02
with
Navigation installed, the mounting bracket that
secures the Navigation Computer will need to be
replaced with P/N 84 13 6 924 547 as shown in
the illustration, in order to install the ULF Control
Module.
2.
Locate the black 54-pin plug and white FAKRA
connectors, located in the upper right corner
above the wheel well housing.