Retrofit / Installation kit No.: 84 64 0 021 187 (see cover sheet for others) Issue date: 02.2001
Installation instructions No.: 01 29 0 021 199
Remove the detent (40) from the hands-free kit
control module (2), as shown in the figure, using
an oscillating saw.
Check the position of the hands-free kit
control module (2).
12. To install the hands-free kit control module
(for cars without SA534 automatic air conditioning)
F 46 1510 B
40
2
40
29
180
120
29
5
F 46 1511 B
30
120
180
29
40
30
F 46 1512 B
2
30
21
5
20
F 46 1513 B
Clean (degrease) the retaining plate (5)
before affixing the Dual securing strip,
fine (29).
Cut the 300 mm length of Dual securing strip,
fine (29) to a length of 120 mm.
Affix the Dual securing strip, fine (29) to the
retaining plate (5) as shown in the figure.
The 180 mm length of Dual securing strip,
fine (40) is not required.
Cut the 300 mm length of Dual securing strip,
coarse (30) to a length of 120 mm.
Press the Dual securing strip, coarse (30) on to
the Dual securing strip, fine (29) that you
previously affixed to the retaining plate.
The 180 mm length of Dual securing strip,
coarse (40) is not required.
Remove the backing foil from the Dual securing
strip, coarse (30).
Secure the hands-free kit control module (2) to
the retaining plate (5) using two hexagonal
screws with washers M5x14 (20) from below and
two hexagonal nuts with washers M5 (21).
Check the bond between the hands-free kit
control module (2) and the Dual securing strip,
coarse (30).
EN/15