EN/9
Retrofit / Installation kit No. 82 82 0 304 134 (others see cover sheet)
Installation Instructions No. 01 29 0 141 494
Issue date: 05.2003
5.
To install the roof hoop (cars with a sunroof)
0
0
0
0
0
0
The figure shows installation of the threaded
rivets on the left-hand side of the car.
Proceed in exactly the same way on the right-
hand side.
When drilling, use a vacuum cleaner to suck
up all chips and swarf.
Drill the holes, 7 mm diameter, at the markings
(30).
Deburr the edges of the holes.
Push threaded rivets M5x13.5 (8) into the holes
and fix in place with threaded rivet pliers.
0
Magnified view shows section A-A.
Stick a Velcro strip 300 mm (6) onto the retaining
lug (30) on the roof hoop (4) as shown in the figure.
(Cut off any excess length.)
0
Cut through one damping strip (7) lengthways.
Cut through two damping strips (7) sideways.
8
30
039 0221 B
6
A
A
30
4
4
6
039 0314 B
039 0222 B
7
1x
2x
7