EN/19
Retrofit / Installation kit No. 82 82 0 304 134 (others see cover sheet)
Installation Instructions No. 01 29 0 141 494
Issue date: 05.2003
9.
To install the DVD console (cars with an alarm system)
0
0
0
0
0
Magnified view shows section A-A.
Glue the Velcro strip (6) onto the retaining plate
(30) of the DVD console (1) as shown in the figure.
(Cut off any excess length.)
0
Route the branch
A1
of the
power supply cable
A
and the connection plug for the ultrasonic module
(30) through the opening (31) in the headlining (32).
0
Connect the branch
A1
to the connection plug
(30)
of the DVD console (1).
Connect the connection plug for the ultrasonic
module (31) to the branch
B1
of the alarm system
adapter cable
B
.
Glue the rattle guard (20) onto the cable so the
plug connector (31+
B1
) is enveloped.
0
As you are attaching the DVD console,
ensure that you do not jam or damage the
connection cables.
Push the DVD console (1) and the retaining plate
(30) into the retaining lug (31) on the roof hoop.
If the fit between the retaining plate (30) and the
retaining lug (31) is not sufficiently secure, bend
the retaining lug (31) or the retaining plate (30)
slightly.
6
1
30
A
A
6
30
1
039 0247 B
A1
32
30
31
039 0248 B
A1
1
B
B1
30
31
20
039 0249 B
1
30
31
039 0250 B