9
Installation Instruction P/N 01 29 2 154 664
Bumper Preparation
1. Remove the bumper carrier from the bumper.
(Old bumper carrier is no longer required with
the trailer hitch mounted).
2. Secure the supplied bumper carrier to the
bumper cover.
3. Reinstall bumper cover/carrier assembly on
vehicle. Secure with original Torx screws (1)
are now screwed through the tow bar bumper
brackets. (Tightening torque: 55Nm).
4. Reinstall heat shields and rear mufflers.
5. Apply the adhesive label (ball position) over
the receiver tube on the painted surface of
the bumper (clean application area
beforehand).
Important: The ball mount used should
not exceed the dimensions as shown.