6
Installation Instruction P/N 01 29 2 154 664
Crossmember Installation
1. Mount the left and right support (1) through
the opening in the body for the metallic
impact absorber (a). Repeat this step for
both left, and right sides.
Note: The support brackets are position
specific. The locating pin on each
bracket must be in the lower inward
position.
2. Install the supports (1) with the bolts
M10x85 (2) and 10.5x25x3 washers (3),
and the bolts M10x30 (4) and 10.5x25x3
washers (3) hand tight.
3. Install M10x30 bolts (2) and 10.5x25x3
washers (2) to the welded nuts on the
vehicle beneath the bracket (2) on the left
and right hand sides of the luggage
compartment, hand tight.
4. Position basic portion of the crossmember
(1) onto the supports installed in step 1.