© BMW AG, Munich
01 29 0 149 181
11/2008
(T/S)
12
6.
Installing Park Distance Control
-
In centre area of dashboard, route branches
A8
,
A9
and
A10
of PDC wiring loom
A
further to the
left.
Secure PDC wiring loom
A
with cable ties to the
existing wiring harness (1).
Route 4-pin black socket housing
X361
of
branch
A8
to location of PDC switch.
Route branches
A9
and
A10
behind knee guard
into footwell on driver's side.
Connect 4-pin black socket housing
X361
to
PDC switch and install control panel
E
with
PDC switch (not illustrated) as described in
TIS instructions 51 45 ... .
-
Connect socket contacts of branches
A9
and
A10
at strip connector (1) in footwell on driver's
side as follows:
Socket contact of branch
A9
in strip connector
X217
with BRSW wire.
Socket contact of branch
A10
in strip connector
X806
with GRRT wire.
If there are no free plug-in slots in strip con-
nectors
X217
and
X806
twin-lead termi-
nals must be made with strip connector
L
from the parts kit (not illustrated ).
Route branch
A11
in right-hand A-pillar up to
grommet (1).
Pass branch
A11
through grommet (1) into
engine compartment.
