© BMW AG, Munich
01 29 0 149 181
11/2008
(T/S)
14
6.
Installing Park Distance Control
-
Secure front converter wiring loom
C
with cable
ties to existing wiring harness (to aluminium
section of front bumper carrier) (not illustrated).
The front converter wiring loom
C
is a com-
plete module.
Tie back unused branches (connections for
fog light, horn etc.).
Route 12-pin black socket housing
C5
of front
converter wiring loom
C
and 12-pin black pin
housing
A12
to holder mount (1) in front of the
spring strut.
Fit holder
I
in the guide of pin housing
A12
.
Connect socket housing
C5
and pin housing
A12
and fit holder
I
in mount (1).
Fit four holders for ultrasonic converters
F
and front ultrasonic converters
H
in front right
bumper strip
N
and front left bumper strip
O
as described in TIS instructions 66 20 520
(not illustrated).
Fit a total of five cable ties for bumper panel
Q
in
the holes in the rear bumper panel (1).
Install rear converter wiring loom
B
in rear
bumper panel (1) as described in TIS instruc-
tions 51 12 157 (not illustrated).
Install holder
I
as shown in illustration
065 0082 V and secure plug connection at
the corresponding opening in rear bumper
panel (1) (not illustrated).
Fit four holders for ultrasonic converters
F
and
rear ultrasonic converters
G
in rear bumper
strip
P
according to TIS instructions 66 20 540
(not illustrated).
