BMW 645Ci, Owner'S Manual

Page: 74 / 216

Everything under control
72
Stopwatch
Control Center, for principle details, refer to
page
16 :
1. Open "Navigation".
On vehicles without navigation system:
open "Car Data"
2. Select "Car Data" and press the con-
troller
3. Select "Stopwatch" and press the con-
troller.
Starting and stopping
>
Select "Start" and press the controller.
The stopwatch starts at the displayed
time
>
Select "Reset" and press the controller.
The stopwatch is reset and it restarts if
it was running beforehand
>
Select "Stop" and press the controller.
This stops the timer.
Taking an intermediate time reading
Select "Interim time" and press the control-
ler. This intermediate time appears below
the ongoing primary stopwatch count.
All of the remaining functions remain
available at all times while the stop-
watch is running. The stopwatch continues
operation in the background.
<
Settings on Control Display
Brightness of Control Display
The brightness is automatically adapted to
the ambient lighting conditions. However,
you can change the base setting.
Control Center, for principle details, refer to
page
16 :
1. Press button.
The start menu is opened
2. Press the controller to open the menu
3. Select "Display settings" and press the
controller
4. Select "Brightness" and press the con-
troller
5. If necessary, move the controller to the
right to select "Display Offset"
6. Turn the controller until the desired set-
ting is selected.
Depending on which key you have used to
open the vehicle, the last adjustment is
applied.
Measurement units
You can change the measurement units for
consumption, distances, temperature and
pressure.
1. Open the menu
2. Select "Display settings" and press the
controller
3. Select "Units" and press the controller