BMW 645Ci, Owner'S Manual

Page: 66 / 216

Everything under control
64
Everything under control
Odometer, outside
temperature display, clock
When the ignition is off you can briefly acti-
vate the time, outside temperature and
odometer displays by pressing the knob
3
at the lower left of the instrument cluster.
Outside temperature display, clock,
date 1
The outside temperature and the time are
displayed from ignition key position 1
onwards.
You can set the measurement unit
7
or
6
on the Control Display, refer to Measure-
ment units on page
72 .
To call up the date:
Briefly press the CHECK button on the turn
indicator lever, refer to page
69 .
Setting the time and date, refer to page 73 .
Ice warning
A signal sounds when the outside temper-
ature falls to r37.5
7
/+3
6
; this is
accompanied by a message.
Please bear in mind that the ice warn-
ing does nothing to alter the fact that
black ice may be present on roads at tem-
peratures higher than +37.5
7
/+3
6
, e.g.
on bridges and shaded roads.
<
Odometer and trip odometer 2
To reset the trip odometer to zero:
Press button
3 in the instrument cluster.
Tachometer
The white-striped advance warning field,
arrow
1 , changes depending on the engine
temperature. The segments disappear in
sequence as the engine warms to its nor-
mal operating temperature.
Avoid allowing the engine speed to rise as
far as the advance warning field whenever
possible.
Engine speeds in the red warning field,
arrow
2 , must be avoided.
In this range, the fuel supply is interrupted
to protect the engine.