EN/3
Retrofit / Installation kit No. 51 47 0 027 792
Installation Instructions No. 01 29 0 136 495
Issue date: 3.2001
1.
Important information
Target group
The target group for these installation instructions is specialist staff trained on BMW cars.
All servicing, repair and installation work on BMW cars is completed at your own risk.
All work is to be carried out using current BMW
- Repair manuals
- Servicing manuals
- Work instructions
in a rational sequence with the prescribed tools (special tools) and taking into account the
relevant health and safety regulations.
Safety instructions
BMW cannot accept any liability for damage caused by a failure to follow the work and
instructions set out in these installation instructions. If the part is installed and used
improperly and not as set out in the installation instructions, all warranty claims to BMW
AG shall be rendered void. (The rubber pad on the BMW aluminium footrest must be
checked for signs of wear at regular intervals. A badly worn rubber pad must be replaced
by a new rubber pad since otherwise your safety cannot be guaranteed when you are
driving the car.)
The supplementary sheet supplied with the kit is to be placed in the car after the installation
of the BMW aluminium footrest.
"
Installation information
Only use the securing screws provided to secure the aluminium footrest plate.
"
Required tools and equipment
Drill
3 mm drill bit
Hammer
Centrepunch
Scissors
Torx screwdriver TX 10
Deburring tool
!
