manualshive.com logo in svg

BMW 3 SERIES SEDAN - PRODUCT CATALOGUE, Owner'S Manual

Introducing the BMW 3 Series Sedan - the epitome of elegance and performance. Unlock the full potential of your luxurious ride by accessing the comprehensive Owner's Manual. Seamlessly download this manual for free from our website, allowing you to empower yourself with vital information, maximizing your BMW experience.

Share
Download
background image

Adjusting the height

▷

To raise: pull.

▷

To lower: press the button, arrow 1, and
push the head restraint down.

The center head restraint cannot be adjusted in
elevation.

Folding down head restraints

Extending/retracting head restraint
Only fold down head restraint if no pas‐

sengers are in the rear. Fold out retracted headr‐
ests again if passengers are being carried in the
rear; otherwise, there is increased risk of injury
in the event of an accident.◀

▷

To lower flaps: press the button, arrow 1,
and press down the head restraint.

▷

Fold back up: pull up head restraints.

Removing

Only remove the head restraint if no one will be
sitting in the seat in question.

1.

Pull the head restraint upward as far as pos‐
sible.

2.

Press the button, arrow 1, and pull the head
restraint out completely.

Before transporting passengers
Reinstall the head restraint before trans‐

porting anyone in the seat; otherwise, the pro‐
tective function of the head restraint is unavail‐
able.◀

Seat and mirror memory

General information

Two different driver's seat and exterior mirror
positions can be stored and retrieved for each
remote control. Settings for the backrest width
and lumbar support are not stored in memory.

Storing

1.

Switch on the ignition.

2.

Set the desired position.

Seite 51

Adjusting

Controls

51

Online Edition for Part no. 01 40 2 917 801 - II/13

Summary of Contents for 3 SERIES SEDAN - PRODUCT CATALOGUE



















































































































































































































































Reviews:

No comments

Related manuals for 3 SERIES SEDAN - PRODUCT CATALOGUE

Vauxhall Cascada Quick Reference Manual preview
Cascada
Brand: Vauxhall Pages: 2
Ultra Start KE-6 Owner'S Manual preview
KE-6
Brand: Ultra Start Pages: 8
OEM Audio Reference Series Manual preview
Reference Series
Brand: OEM Audio Pages: 29
Pyle PLCMRV8B Black User Manual preview
PLCMRV8B Black
Brand: Pyle Pages: 4
NavLinkz RL2-SC14 Manual preview
RL2-SC14
Brand: NavLinkz Pages: 21
Scion 2012 iQ Quick Reference Manual preview
2012 iQ
Brand: Scion Pages: 24
Volvo Ski box Installation Instructions Manual preview
Ski box
Brand: Volvo Pages: 7
Brainz 38508 Instruction Manual preview
38508
Brand: Brainz Pages: 2
Reese 50085 Installation Instructions Manual preview
50085
Brand: Reese Pages: 21
Ranger design 5047 Installation Manual preview
5047
Brand: Ranger design Pages: 6
Alfa Romeo Giulia 952 2017 Owner'S Handbook Manual preview
Giulia 952 2017
Brand: Alfa Romeo Pages: 324
Rhino-Rack RLCP05 Installation Manual preview
RLCP05
Brand: Rhino-Rack Pages: 4
Proxel EPS-DUAL Installation Instructions & User Manual preview
EPS-DUAL
Brand: Proxel Pages: 16
Jeep 2012 Patriot Series Owner'S Manual preview
2012 Patriot Series
Brand: Jeep Pages: 505
GStop GSTOP LITE Manual preview
GSTOP LITE
Brand: GStop Pages: 28
Kia D9062 ADU00 Manual preview
D9062 ADU00
Brand: Kia Pages: 17
Hyundai C2017 ADU01 Manual preview
C2017 ADU01
Brand: Hyundai Pages: 7
HaWeKo MBK400 Installation Manual preview
MBK400
Brand: HaWeKo Pages: 2

Brands by name

Popular brands

Load more brands