manualshive.com logo in svg

BMW 3 SERIES SEDAN - PRODUCT CATALOGUE, Owner'S Manual

Introducing the BMW 3 Series Sedan - the epitome of elegance and performance. Unlock the full potential of your luxurious ride by accessing the comprehensive Owner's Manual. Seamlessly download this manual for free from our website, allowing you to empower yourself with vital information, maximizing your BMW experience.

Share
Download
background image

When using the automatic climate control, con‐
densation water, refer to page 

160

, develops

that exits underneath the vehicle.

Automatic recirculated-air control/

recirculated-air mode

You can respond to unpleasant odors or pollu‐
tants in the immediate environment by tempo‐
rarily suspending the supply of outside air. The
system then recirculates the air currently within
the vehicle.

Press the button repeatedly to select
an operating mode:

▷

LEDs off: outside air flows in continuously.

▷

Left LED on, automatic recirculated-air con‐
trol: a sensor detects pollutants in the out‐
side air and controls the shutoff automati‐
cally.

▷

Right LED on, recirculated-air mode: the
supply of outside air into the vehicle is per‐
manently blocked.

If the windows are fogged over, switch off the
recirculated-air mode and press the AUTO but‐
ton to utilize the condensation sensor. Make
sure that air can flow onto the windshield.

Continuous recirculated-air mode
The recirculated-air mode should not be

used for an extended period of time, as the air
quality inside the vehicle deteriorates steadily.◀

Manual air distribution

Press the button repeatedly to select a
program:

▷

Upper body region.

▷

Upper body region and footwell.

▷

Footwell.

▷

Windows and footwell: driver's side only.

▷

Windows, upper body region and footwell:
driver's side only.

If the windows are fogged over, press the AUTO
button to utilize the condensation sensor.

Air flow, manual

To be able to manually adjust the air flow, switch
off the AUTO program first.

Press the left or right side of the button:
decrease or increase air flow.

The selected air flow is shown on the display of
the automatic climate control.
The air flow of the automatic climate control may
be reduced automatically to save battery power.

Rear window defroster

Press the button.
The rear window defroster switches off

automatically after a certain period of time.

Defrosting windows and removing

condensation

Press the button.
Ice and condensation are quickly re‐

moved from the windshield and the front side
windows.

The air flow can be adjusted when the program
is active.
If the windows are fogged over, you can also
switch on the cooling function or press the
AUTO button to utilize the condensation sensor.

Switching the system on/off

Switching off

Press the left button for the minimum
speed.

Switching on

Press any button except

▷

Rear window defroster.

▷

Seat heating.

Seite 141

Climate control

Controls

141

Online Edition for Part no. 01 40 2 917 801 - II/13

Summary of Contents for 3 SERIES SEDAN - PRODUCT CATALOGUE



















































































































































































































































Reviews:

No comments

Related manuals for 3 SERIES SEDAN - PRODUCT CATALOGUE

Jeep Compass Overview Manual preview
Compass
Brand: Jeep Pages: 25
Vauxhall Meriva Quick Reference Manual preview
Meriva
Brand: Vauxhall Pages: 2
Vauxhall Ampera Quick Reference Manual preview
Ampera
Brand: Vauxhall Pages: 2
Vauxhall 2012 Agila Quick Reference Manual preview
2012 Agila
Brand: Vauxhall Pages: 2
Vauxhall 2013 Mokka Owner'S Manual preview
2013 Mokka
Brand: Vauxhall Pages: 209
VBC Racing WildFire Instruction Manual preview
WildFire
Brand: VBC Racing Pages: 34
Vauxhall 2013 Corsa Infotainment system Quick Reference Manual preview
2013 Corsa Infotainment system
Brand: Vauxhall Pages: 2
Vauxhall 2010 Astra Quick Reference Manual preview
2010 Astra
Brand: Vauxhall Pages: 2
Vauxhall Antara Owner'S Manual preview
Antara
Brand: Vauxhall Pages: 236
Kia 2016 Cadenza Owner'S Manual preview
2016 Cadenza
Brand: Kia Pages: 419
FORM FIT HDW 1779 Installation Instructions preview
HDW 1779
Brand: FORM FIT Pages: 2
iRacing Porsche 911 GT3 R User Manual preview
Porsche 911 GT3 R
Brand: iRacing Pages: 25
Whispbar K728W Fitting Instructions Manual preview
K728W
Brand: Whispbar Pages: 85
Havis C-DMM-3005 Installation Instructions preview
C-DMM-3005
Brand: Havis Pages: 5
Volvo Ski box Installation Instructions Manual preview
Ski box
Brand: Volvo Pages: 7
ideus vv900 User Manual preview
vv900
Brand: ideus Pages: 116
LaserLine 921K Operating Instructions preview
921K
Brand: LaserLine Pages: 4
Honda 2001 CR-V Owner'S Manual preview
2001 CR-V
Brand: Honda Pages: 326

Brands by name

Popular brands

Load more brands