BMW 2013 F800GT, Rider'S Manual

Page: 99 / 145

Charging disconnected
battery
Charge battery using a suitable
charger.
Comply with operating instruc-
tions of charger.
After charging, remove terminal
clamps of the charger from the
battery terminals.
In the case of longer peri-
ods when the motorcycle is
not being used, the battery must
be recharged regularly. See the
instructions for caring for your
battery. Always fully recharge
the battery before returning it to
use.
Removing battery
Make sure ground is level and
firm and park motorcycle.
with anti-theft alarm
OE
Switch off anti-theft alarm sys-
tem if necessary.
Switch off ignition.
Remove center fairing panel
(
93).
An incorrect disconnection
sequence increase the risk
of short-circuiting.
Always observe the proper
sequence.
Remove negative cable 1 first.
Then remove positive cable 2 .
Remove screw 3 and take off
battery carrier.
Lift battery up and out, using
tilting movements if it is difficult
to move.
Installing battery
If the motorcycle was dis-
connected from the bat-
tery for a longer time, the current
date must be entered in the in-
strument cluster to ensure the
proper operation of the service
display.
Consult a certified service fa-
cility, preferably an authorized
BMW Motorrad retailer, for set-
ting of the date.
Switch off ignition.
Insert battery into battery com-
partment, with positive terminal
on right in direction of travel.
7
97
z Maintenance