BMW 2013 F800GT, Rider'S Manual

Page: 90 / 145

Push the rear-wheel stand from
the right onto the rear axle.
Apply the retaining disk from
the left; to do so, press the un-
lock button.
Position motorcycle upright
while simultaneously pressing
grip of stand back so that both
stand rollers rest on ground.
Then press the grip down to
the ground.
Lamps
Replacing low-beam and/
or high-beam bulb
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
Remove cover 1 for high-beam
headlight or cover 2 for low-
beam headlight by pulling on
lever
3 .
The alignment of connec-
tor, spring wire strap and
bulb may differ from that shown
in the following illustrations.
Disconnect plug connection 1 .
7
88
z Maintenance