BMW 2013 F800GT, Rider'S Manual

Page: 86 / 145

tion arrows on the tires or on the
rim.
Roll front wheel into front sus-
pension (telescopic fork).
Lift front wheel and install
quick-release axle
2 with
appropriate torque.
Quick-release axle in
telescopic fork
37 lb/ft (50 Nm)
Tighten axle clamping screws 1
to appropriate torque.
Pinch bolt of quick-re-
lease axle
Tightening sequence:
tighten alternatively
14 lb/ft (19 Nm)
Remove front wheel stand.
without center stand
OE
Remove auxiliary stand.
Slide the brake calipers onto
the brake rotors.
Install screws 1 with specified
torque.
Brake caliper on fork leg
22 lb/ft (30 Nm)
Insert wheel speed sensor in
bore and install screw
1 .
Remove adhesive tape from
wheel rim.
Operate brakes several times
until brake pads contact brake
disk.
Removing rear wheel
Make sure ground is level and
firm and place motorcycle
on a suitable auxiliary stand.
7
84
z Maintenance