BMW 2012 X1 Owner'S Manual Download Page 53

Page: 53 / 291

Center rear seat

1 Direction of travel
2 Head restraint
3 Cargo area floor
4 Hook for upper retaining strap
5 Mounting point/eye
6 Backrest
7 Upper retaining strap

When using the cargo cover, pass the upper re‐
taining strap between the rear seat backrest and
the cargo cover.

Attaching the upper retaining strap to

the mounting point

On outer rear seats:

Slide the head restraint upward.

Guide the upper retaining strap between the
supports of the head restraint.

Attach the hook of the retaining strap to the
mounting eye.

Pull the retaining strap taut.

Slide the head restraint into the bottom po‐
sition.

On center rear seat:

Route the upper retaining strap over the
middle of the head restraint.

Attach the hook of the retaining strap to the
mounting eye.

Pull the retaining strap taut until it com‐
presses the cushion of the head restraint,
thus preventing the strap from sliding off.

Locking the doors and

windows

Rear doors

Push the locking lever on the rear doors down.
The door can now be opened from the outside
only.

Safety switch for the rear

Press the button on the driver's door if
children are being transported in the

rear.

This locks the rear window switches so that the
windows cannot be operated from the rear:
safety switch, refer to page

Seite 53

Transporting children safely

Controls

Online Edition for Part no. 01 40 2 914 595 - VI/12

Summary of Contents for 2012 X1




































































































































































































































































































Search results

Summary of Contents for 2012 X1

Reviews:

Related manuals for 2012 X1

Brands by name

Popular brands

BMW 2012 X1, Owner'S Manual

Search results

Summary of Contents for 2012 X1

Reviews:

Related manuals for 2012 X1

Brands by name

Popular brands