manualshive.com logo in svg

BMW 2012 X1, Owner'S Manual

The BMW 2012 X1 Owner's Manual is a comprehensive guide that provides vital information and instructions to ensure optimal performance and safety for your vehicle. Easily accessible for free download at manualshive.com, this manual is a valuable resource for every BMW X1 owner, offering detailed insights and helpful tips.

Share
Download
background image

Press the left or right side of the button:
decrease or increase air volume.

The selected air volume is shown on the display
of the automatic climate control.
The air volume of the automatic climate control
may be reduced automatically to save battery
power.

Automatic recirculated air mode/

recirculated air mode

You can respond to unpleasant odors or pollu‐
tants in the immediate environment by tempo‐
rarily suspending the supply of outside air. The
system then recirculates the air currently within
the vehicle.

Press the button repeatedly to select
an operating mode:

▷

LEDs off: outside air flows in continuously.

▷

Left LED on, automatic recirculated-air con‐
trol: a sensor detects pollutants in the out‐
side air and controls the shutoff automati‐
cally.

▷

Right LED on, recirculated air mode: the
supply of outside air into the vehicle is per‐
manently blocked.
If the windows are fogged over, switch off
the recirculated-air mode and press the
AUTO button to utilize the condensation
sensor. Make sure that air can flow onto the
windshield.

Continuous recirculated-air mode
The recirculated air mode should not be

used for an extended period of time, as the air
quality inside the vehicle deteriorates steadily.◀

Via the button on the steering wheel

A button on the steering wheel can be used to
quickly switch between recirculated air mode
and the previous setting.

ALL program

Press the button.
The current temperature setting for the

driver's side is transferred to the front passenger
side.

If the temperature setting is changed on the
driver's side, the temperature on the front pas‐
senger side changes as well.
The program is switched off if the setting is
changed on the front passenger side or the but‐
ton is pressed again.

Defrosting and defogging windows

Press the button.
Ice and condensation are quickly re‐

moved from the windshield and the front side
windows.

For this purpose, also switch on the cooling
function.

Cooling function

The passenger compartment can only be
cooled with the engine running.

Press the button.
The air is cooled and dehumidified and

– depending on the temperature setting –
warmed again.

Depending on the weather, the windshield may
fog up briefly when the engine is started.
The cooling function is switched on automati‐
cally with the AUTO program.
When using the automatic climate control, con‐
densation water, refer to page 

128

, develops

that exits underneath the vehicle.

Rear window defroster

Press the button.
The rear window defroster switches off

automatically after a certain period of time.

Seite 107

Climate

Controls

107

Online Edition for Part no. 01 40 2 914 595 - VI/12

Summary of Contents for 2012 X1




































































































































































































































































































Reviews:

No comments

Related manuals for 2012 X1

Daihatsu S85 Wiring Diagrams preview
S85
Brand: Daihatsu Pages: 41
Daihatsu S85 Workshop Manual preview
S85
Brand: Daihatsu Pages: 268
cam HS Series Operating Manual preview
HS Series
Brand: cam Pages: 28
Warrior Products 3860 Quick Start Manual preview
3860
Brand: Warrior Products Pages: 2
Carefree Slideout Cover Service Manual preview
Slideout Cover
Brand: Carefree Pages: 12
Ford F-150 2018 Quick Reference Manual preview
F-150 2018
Brand: Ford Pages: 12
Kia Sportage 2018 Features & Functions Manual preview
Sportage 2018
Brand: Kia Pages: 54
Whispbar K604W Fitting Instructions Manual preview
K604W
Brand: Whispbar Pages: 15
NavLinkz RL2-SC14 Manual preview
RL2-SC14
Brand: NavLinkz Pages: 21
Fab Fours VI-COWL Installation Instructions Manual preview
VI-COWL
Brand: Fab Fours Pages: 19
Volvo V70XC Cross country 1998 Owner'S Manual preview
V70XC Cross country 1998
Brand: Volvo Pages: 262
Valeo Park Vision VAL632210 Instruction Manual preview
Park Vision VAL632210
Brand: Valeo Pages: 25
Veldo Teknoloji DUCATO Manual preview
DUCATO
Brand: Veldo Teknoloji Pages: 32
Linear Logic scangauge2 Quick Start Manual preview
scangauge2
Brand: Linear Logic Pages: 8
r.LiNK RL2-MMI3G-GW Manual preview
RL2-MMI3G-GW
Brand: r.LiNK Pages: 21
Fiat 500L 2020 Owner'S Manual preview
500L 2020
Brand: Fiat Pages: 284
Aston Martin V8 Vantage Workshop Manual preview
V8 Vantage
Brand: Aston Martin Pages: 415
Subaru S0A367010 Installation Instructions preview
S0A367010
Brand: Subaru Pages: 2

Brands by name

Popular brands

Load more brands