BMW 2012 X1 Owner'S Manual Download Page 225

Page: 225 / 291

Manually unlocking fuel filler flap

In the event of a malfunction, the fuel filler flap
can be released manually:

Press the cover out of the cargo area side
panel at the rear and remove it.

Take the button with the fuel pump symbol
out of the holder toward the front and pull.
This releases the fuel filler flap.

Observe the following when

refueling

When refueling, insert the filler nozzle com‐
pletely into the filler pipe. Lifting up the fuel
pump nozzle during refueling causes:

▷

Premature pump shutoff.

▷

Reduced efficiency in the fuel-vapor recov‐
ery system.

The fuel tank is full when the filler nozzle clicks
off the first time.

Do not overfill the fuel tank
Do not overfill the fuel tank; otherwise, es‐

caping fuel may harm the environment or dam‐
age the vehicle.◀

Handling fuels
Follow the safety instructions provided at

gas stations; otherwise, there is a danger of per‐
sonal injury and property damage.◀

Fuel tank capacity

X1 sDrive28i: approx. 16.1 US gal/61 liters.

X1 xDrive28i/X1 xDrive35i: approx. 16.6 US gal/
63 liters.

Seite 225

Refueling

Mobility

225

Online Edition for Part no. 01 40 2 914 595 - VI/12

Summary of Contents for 2012 X1




































































































































































































































































































Search results

Summary of Contents for 2012 X1

Reviews:

Related manuals for 2012 X1

Brands by name

Popular brands

BMW 2012 X1, Owner'S Manual

Search results

Summary of Contents for 2012 X1

Reviews:

Related manuals for 2012 X1

Brands by name

Popular brands