BMW 2007 M5 Owner'S Manual Download Page 38 | Manualshive

Page: 38 / 256

background image

Opening and

closing

36

>

When transporting on car-carrying trains,
by sea or on a trailer

>

When animals are to remain in the vehicle

Switching off tilt alarm sensor and

interior motion sensor

Press the

button on the remote control

again as soon as the vehicle is locked.
The indicator lamp lights up briefly and then
flashes continuously. The tilt alarm sensor and
the interior motion sensor are switched off until
the next time the vehicle is unlocked and subse-
quently locked again.

Comfort access*

Comfort access enables you to access your
vehicle without having to hold the remote con-
trol in your hand. It is sufficient to carry the
remote control with you, e.g. in your jacket
pocket. The vehicle automatically detects the
related remote control in the immediate vicinity
or in the interior.
Comfort access supports the following func-
tions:

>

Unlocking/locking vehicle

>

Comfort closing

>

Opening luggage compartment lid sepa-
rately

>

Starting engine

Functional requirement

>

The vehicle or the luggage compartment lid
can only be locked if the vehicle detects that
the remote control you are carrying is out-
side the vehicle.

>

The next unlocking and locking cycle is not
possible until after approx. 2 seconds.

>

The engine can only be started if the vehicle
detects that the remote control is located in
the vehicle.

Comparison with ordinary remote
control

You can control the functions mentioned previ-
ously with the comfort access or by pressing
the buttons on the remote control. Therefore,
please familiarize yourself with the information
on opening and closing beginning on page

beforehand.
The special features when using comfort
access are described in the following.

Should a short delay occur when opening
or closing the windows or the glass sun-

roof, the system is checking whether a remote
control is located in the vehicle. Please repeat
opening or closing if necessary.

<

Unlocking

Completely grasp a door handle, arrow

1

.

This corresponds to pressing the

button.

Locking

>

For the driver's door, touch the area high-
lighted in the picture, arrow

2

, with your fin-

ger for approx. 1 second.

>

For the remaining doors, touch the area
highlighted in the picture, arrow

3

, with your

finger for approx. 1 second.

This corresponds to pressing the

but-

ton.

Please make sure that the ignition and all
electronic systems/consumers are

switched off before locking to save the bat-
tery.

<

Comfort closing

Hold a finger or the back of the hand on the sur-
face, arrow

2

or

3

.

ba8_m5us.book Seite 36 Montag, 5. Februar 2007 12:03 12

Online Edition for Part no. 01 41 0 013 310 - © 02/07 BMW AG

«
...
36
37
38
39
40
...
»

Summary of Contents for 2007 M5

































































































































































































































































Reviews:

No comments

Related manuals for 2007 M5

Brand: Vaisala Pages: 24

Brand: K&M Pages: 3

ESCALADE FAMILY - SPECIFICATIONS 2011

Brand: Cadillac Pages: 1

Brand: Horn Tools Pages: 6

Brand: BMW Pages: 21

Brand: WABCO Pages: 32

PACCAR PACMOBILE 20

Brand: DAF Pages: 18

Brand: EUFAB Pages: 12

Brand: Broadfeet Pages: 2

S90 - ACCESSORY PANEL

Brand: Volvo Pages: 166

Brand: Mitsubishi Pages: 362

Brand: Lexus Pages: 82

Brand: Seat Pages: 300

Brand: Mercedes-Benz Pages: 66

Brand: Datsun Pages: 104

Brand: Edelbrock Pages: 2

FUEL TANK GAUGE

Brand: VDO Pages: 10

Brand: Prorack Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands