BMW Motorrad R 1250 R Rider'S Manual Download Page 92

Page: 92 / 300

OPERATION

ATTENTION

Failure of Hill Start Control

Risk of accident

Apply the brakes manually

to hold the vehicle.

Hill Start Control is purely

a comfort system to facil-

itate holding the machine and

pulling way on uphill gradients

and should not be confused

with a parking brake.

Apply firm pressure to hand-

brake lever

or to the foot-

brake lever and then quickly

release the lever.

shows green.

Hill Start Control is activated.

To switch off Hill Start

Control, operate handbrake

lever

or the footbrake lever

again.

disappears.

Alternatively, ride off in 1st or

2nd gear.

In order for the motor-

cycle to pull away from

rest with Hill Start Control, the

throttle grip has to be turned to

open the throttle for pullaway.

Once the brake has been

fully released, the holding

symbol disappears.

Hill Start Control is deactiv-

ated.

See the section entitled "En-

gineering details" for more

information on Hill Start Con-

trol:

Hill Start Control function

(

167)

Setting up Hill Start Control

Pro

with riding modes Pro

Switch on the ignition (

62).

Navigate to

Settings

Vehicle settings

Select

HSC Pro

To switch off Hill Start Con-

trol Pro, select

Off

Hill Start Control Pro is deac-

tivated.

To switch on manual Hill Start

Control Pro, select

Manual

Hill Start Control Pro can be

activated by forcefully oper-

Summary of Contents for R 1250 R













































































































































































































































































































Search results

Summary of Contents for R 1250 R

Reviews:

Brands by name

Popular brands

BMW Motorrad R 1250 R, Rider'S Manual

Search results

Summary of Contents for R 1250 R

Reviews:

Brands by name

Popular brands