BMW Motorrad R 1250 R Rider'S Manual Download Page 113

Page: 113 / 300

107

The device's Bluetooth func-

tion must be active

The device must be "visible"

to others

The device must support the

A2DP profile

Other Bluetooth-compatible

devices must be OFF (e.g.

mobile phones and naviga-

tion systems).

Please consult the operating

instructions for your commu-

nication system.

Pairing

Call up the

Settings

Con-

nections

menu.

Bluetooth connections can

be established, managed and

deleted in the

CONNECTIONS

menu. The following

Bluetooth connections are

displayed:

Mobile device
Rider's helmet
Passenger helm.

The connection status for mo-

bile devices is displayed.

Connect mobile device

Pairing (

107).

Activate the mobile device's

Bluetooth function (see mo-

bile device's operating in-

structions).

Select

Mobile device

and

confirm.

Select

Pair new mobile

device

and confirm.

Mobile devices are being

searched for.

flashes in the bottom

status line during pairing.

Mobile devices found are dis-

played.

Select and confirm mobile

device.

Follow the instructions on the

mobile device.

Confirm that the code

matches.

The connection is established

and the connection status up-

dated.

If the connection is not

established, consult the

troubleshooting chart in the

section entitled "Technical

data". (

232)

Depending on the mobile

device, telephone data is

transferred to the vehicle

automatically.

Telephone data (

117)

If the telephone book is

not displayed, consult the

troubleshooting chart in the

section entitled "Technical

data". (

233)

If the Bluetooth connection

is not working as expected,

consult the troubleshooting

Summary of Contents for R 1250 R













































































































































































































































































































Search results

Summary of Contents for R 1250 R

Reviews:

Brands by name

Popular brands

BMW Motorrad R 1250 R, Rider'S Manual

Search results

Summary of Contents for R 1250 R

Reviews:

Brands by name

Popular brands