BMW Motorrad R 1250 R Rider'S Manual Download Page 223

Page: 223 / 300

217

NAVIGATION SYSTEM

Securing navigation system

with preparation for naviga-

tion system

with navigation system

Navigation prepara-

tion is suitable from

BMW Motorrad Navigator IV.

The latching system of

the Mount Cradle is not

designed to protect against

theft.

Always remove the navigation

system and stow it away safely

as soon as you finish your ride.

Turn ignition key

counter-

clockwise.

Pull the lock retainer

to the

left

Press the lock

in.

The Mount Cradle is unlocked

and cover

can be pivoted

forward and removed.

Insert the navigation system

at the bottom and swing it

toward the rear in one rota-

tional movement.

The navigation system en-

gages with an audible click.

Push the lock retainer

all

the way to the

right

Lock

is locked.

Turn ignition key

clockwise.

The navigation system is se-

cured and the ignition key can

be removed.

Removing navigation system

and installing cover

with preparation for naviga-

tion system

with navigation system

ATTENTION

Dust and dirt on the

Mount Cradle contacts

Damaged contacts

Always reinstall the cover as

soon as you finish your ride.

Summary of Contents for R 1250 R













































































































































































































































































































Search results

Summary of Contents for R 1250 R

Reviews:

Brands by name

Popular brands

BMW Motorrad R 1250 R, Rider'S Manual

Search results

Summary of Contents for R 1250 R

Reviews:

Brands by name

Popular brands