manualshive.com logo in svg

BMW Motorrad KW074-DAMS99, Translation Of The Original Operating Instructions, Page: 45 / 93

Share
Download
BMW Motorrad KW074-DAMS99 Translation Of The Original Operating Instructions Download Page 45

877-00113_1.2_06.08.2018

43

Adjusting X2City to rider

6

Adjusting e-scooter to rider

6.1

Setting the handlebars

 

 

Open the clamping lever for the quick release on 
the stem.

Pull out the handlebars to the required height.

Lock the quick release.

Check the clamping force of the quick releases. 

Crash caused by incorrectly set clamping force

Excessively high clamping force will damage the quick 
release and cause it to lose its function.

Insufficient clamping force will cause a detrimental 
transmission of force. This can cause components to 
break. This will result in a crash and injuries.

Never fasten a quick release using a tool (e.g. 
hammer or pliers).

Only use the clamping lever with the specified set 
clamping force.

Maximum tightening torque for the 

clamping screws of the handlebars*

10 Nm

Table 23:

Handlebars clamping screw maximum tightening torque

CAUTION

!

EN_877-00113_1.2__BMW E_Scooter_Marquardt_Inhalt.book  Page 43  Monday, August 6, 2018  11:26 AM

Summary of Contents for KW074-DAMS99






























































































Reviews:

No comments