BMW Motorrad G 310 R Rider'S Manual Download Page 92

Page: 92 / 166

MAINTENANCE

ATTENTION

Tightening of screwed

connections with incorrect

tightening torque

Damage or loosening of

screwed connections

Always have the tightening

torques checked by a

specialized workshop,

preferably an authorized

BMW Motorrad retailer.

Lubricate the tire tread on the

spacer bush

Lubricant

Optimoly TA

Insert the spacer bushing

into the wheel hub on the left

side with the seat facing out-

wards.

ATTENTION

Front wheel installation op-

posite the running direction

Accident hazard

Observe running direction

arrows on tire or rim.

ATTENTION

Improper installation of the

front wheel

Damage to the wheel speed

sensor

When rolling in the front

wheel, pay attention to the

wheel speed sensor.

Roll the front wheel into the

front suspension. When doing

so, make sure that the wheel

speed sensor is not damaged.

Lubricate the quick-release

axle

Summary of Contents for G 310 R







































































































































































Search results

Summary of Contents for G 310 R

Reviews:

Related manuals for G 310 R

Brands by name

Popular brands

BMW Motorrad G 310 R, Rider'S Manual

Search results

Summary of Contents for G 310 R

Reviews:

Related manuals for G 310 R

Brands by name

Popular brands