BMW Motorrad G 310 R Rider'S Manual Download Page 83

Page: 83 / 166

If the wear marks are no longer

visible:

WARNING

Dropping below the mini-

mum pad thickness

Reduced braking action, dam-

age to the brake

In order to ensure the oper-

ating reliability of the brake

system, make sure that the

brake pads are not worn be-

yond their minimum thick-

ness.

Have brake pads renewed

at a specialist workshop,

preferably an authorized

BMW Motorrad retailer.

BMW Motorrad recommends

you only install genuine brake

pads from BMW Motorrad.

Checking rear brake pad

thickness

Park motorcycle. Ensure that

the ground is firm and level.

Conduct a visual inspection

of the brake pad thickness.

Direction of view: from rear,

looking at brake pads

Inspect the chamfer

Summary of Contents for G 310 R







































































































































































Search results

Summary of Contents for G 310 R

Reviews:

Related manuals for G 310 R

Brands by name

Popular brands

BMW Motorrad G 310 R, Rider'S Manual

Search results

Summary of Contents for G 310 R

Reviews:

Related manuals for G 310 R

Brands by name

Popular brands