BMW Motorrad G 310 GS Rider'S Manual Download Page 17

Page: 17 / 170

the normal provision of ser-

vices requires legal permission,

contractual agreement or con-

sent. It is also possible to have

the entire data connection ac-

tivated or deactivated. Stat-

utory functions are excluded

from this.

Services from other providers

When using online services

from other providers, these

services are subject to the re-

sponsibility and the data pro-

tection and operating con-

ditions of the individual pro-

vider. The vehicle manufacturer

has no influence on the con-

tent that is exchanged in this

instance. Information on the

type, scope and purpose of the

data capture and use of per-

sonal data as part of the ser-

vices of third parties can be

ascertained from the individual

provider.

Summary of Contents for G 310 GS











































































































































































Search results

Summary of Contents for G 310 GS

Reviews:

Related manuals for G 310 GS

Brands by name

Popular brands

BMW Motorrad G 310 GS, Rider'S Manual

Search results

Summary of Contents for G 310 GS

Reviews:

Related manuals for G 310 GS

Brands by name

Popular brands