BMW Motorrad G 310 GS Rider'S Manual Download

Page: 101 / 170

Checking chain wear

Engage 1st gear.

Turn the rear wheel in the

normal direction of travel until

the chain is tensioned.

Determine the length of the

chain underneath the rear

wheel swinging arm above

the middle of 10 rivets in 3

different places.

Permissible chain length

max 144.30 mm (measured

from the

centre

of 10 rivets,

chain pulled taut)

If the chain has stretched to the

maximum permissible length:

Consult a specialist work-

shop, preferably an authorised

BMW Motorrad retailer.

Check whether a rivet head

has twisted out of line.

Rivet heads are parallel to the

chain centreline

Chain riveting is OK.

If one or more rivet heads have

twisted out of line:

Consult a specialist work-

shop, preferably an authorised

BMW Motorrad retailer.

LIGHTING

Replacing LED light sources

WARNING

Vehicle overlooked in traffic

due to failure of the lights

on the vehicle

Safety risk

Always replace a faulty bulb

at the earliest possible op-

portunity. Consult a special-

ist workshop, preferably an

authorised BMW Motorrad

Retailer.

Summary of Contents for G 310 GS











































































































































































Search results

Summary of Contents for G 310 GS

Reviews:

Related manuals for G 310 GS

Brands by name

Popular brands

BMW Motorrad G 310 GS, Rider'S Manual

Search results

Summary of Contents for G 310 GS

Reviews:

Related manuals for G 310 GS

Brands by name

Popular brands