BMW Motorrad F 800 GS 2013, Rider'S Manual, Page: 114 / 166

Roll the rear wheel back until it
is clear of the swinging arm.
The sprocket and the
spacer sleeves on left
and right are loose fits in the
wheel. Make sure that these
parts are not damaged or lost on
removal.
Install the rear wheel
Possible malfunctions when
ABS and ASC intervene, if
any other wheel but the series
standard wheel is installed.
See the information on the effect
of wheel size on chassis and sus-
pension control units ABS and
ASC at the start of this chapter.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
Always have the security of the
fasteners checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Roll the rear wheel into the
swinging arm, making sure that
the brake disc passes between
the brake pads.
Roll the rear wheel as far
forward as possible and loop
chain
8 over the sprocket.
Seat left adjusting plate 7 in
the swinging arm and install
quick-release axle
6 in the
brake caliper and the rear
wheel.
Make sure that the axle fits
into the recess of the adjust-
ing plate.
8
112
z Maintenance
ProCarManuals.com